POS PRINTER NOT WORKING

POS Printer Troubleshooting Guide

Use these steps when a receipt printer won’t print, prints blank, or appears offline.

1. Check power

- Make sure the power cable is firmly connected to the printer and outlet.

- Check the printer’s power switch and indicator lights.

- Turn the printer off, wait 10 seconds, then turn it back on.

 

2. Check the paper

- Open the printer and confirm the paper roll is installed in the correct direction.

- Use the correct paper.

- Pull a short length of paper out before closing the cover.

- Check for jams, scraps, or a roll that has run out.

 

Blank receipts? Thermal paper prints on only one side. Flip the roll and try again.

 

3. Check the connection:USB

- Confirm the cable is firmly connected at both ends.

- Try another USB port or a known-good cable.

Ethernet or network

- Check that the network cable is connected and its link lights are on.

- Confirm the printer and POS device are on the same network.

- Restart the printer and, if appropriate, the network router.

Article Details